TROUBLESHOOTING / Troubleshooting B T-5 Fast travel is not operated. Travel mode does not change from slow mode to fast mode. Related MC Fault Codes: 11200-3, 11200-4, 11202-3, 11202-4, 11206-3, 11206-4, 11208-3, 11208-4, 11304-3, 11304-4, 11307-3, 11307-4, 11405-2, 11405-3, 11405-4 Refer to the pages for the SYSTEM / Control sec- tion / Travel Motor Swash Angle Control in the T/M (Operational Principle). Check the wiring connections first. If the maximum speed cannot reach at the fast mode, the engine speed automatic increase con- trol at travel may be faulty. Refer to “E-6 Faulty HP Mode”. Faulty travel mode switch, or open circuit in harness be- tween travel mode switch and MC.
NO Monitor travel mode switch. Check if displayed indi- cation is highlighted in response to travel mode switch operation. NO Check if symptom is re- versed when pressure sen- sor (travel) is switched with another pressure sensor. NO · Monitor item: Travel mode · Possible to display by service menu and moni- toring by monitor unit Monitor pressure sen- sor (travel). Check if pressure var- ies in response to travel lever operation. YES · Monitor item: Travel control pressure · Possible to display by service menu and moni- toring by monitor unit. · Fault Code: 11200-3, 11200-4: Pump 1 delivery pres- sure sensor 11202-3, 11202-4: Pump 2 delivery pres- sure sensor 11206-3, 11206-4:
Pump 1 control pres- sure sensor 11208-3, 11208-4: Pump 2 control pres- sure sensor 11304-3, 11304-4: Pressure sensor (travel) 11307-3, 11307-4: Pressure sensor (front attachment) 11405-2, 11405--3, 11405-4: Solenoid valve unit (SI) Check if fault code is displayed. Check if travel motor swash angle control valve is bound or scored. YES Faulty corresponding sensor, or open circuit in harness be- tween MC and sensor. Faulty solenoid valve unit (SI), or open circuit in harness be- tween solenoid valve unit (SI) and MC. YES NOTE: In case other fault codes are displayed, perform troubleshoot- ing corresponding to the displayed fault code. T5-7-130