Crankshaft, Main Bearings and Flywheel/Pulley (without front PTO) CTM3274 (01JUL99) 15-8 Saran Liter Engines 060799 PN=105 PULLEY OR VIBRATION DAMPER INSTALLATION NOTE: 3 cylinder crankshaft pulleys and flywheels are unbalanced and therefore are not interchangeable with 4 or 6 cyl. engine parts. Several unbalance -UN-16JUN98 values are used, take care not to mix parts. Refer to relevant Parts Catalogs to order appropriate parts. CD30581 1. Install shaft key (A) on crankshaft. 2. Position pulley or vibration damper on crankshaft nose with washer (B) and cap screw (C). 2. Tighten as follows: TORQUE SPECIFICATIONS —45 mm (1.77 in.) bolt length (dry) . . . . . . . . . . . . . . . . . . . . . . .
. . 150 N·m (110 lb-ft) —112 mm (4.41 in.) bolt length (lubricated) . . . . . . . . . . . . . . . . . . . . 150 N·m (110 lb-ft) plus 60˚ angle CD,3274,G15,3 -19-04JAN99 15 8