Camshaft, Balancer Shafts and Timing Gear Train/Camshaft CTM3274 (01JUL99) 20-10 Saran Liter Engines 060799 PN=133 REMOVING CAMSHAFT NOTE: Mark parts so that they can be reinstalled in their original positions. Remove cylinder head, cam followers and fuel pump. -UN-07MAR95 Remove cap screws (A) and pull camshaft straight out. IMPORTANT: When removing camshaft, be careful that lobes do not damage the bearing surfaces in bores. CD7105 NOTE: Camshaft can be removed from engine without removing cylinder head by holding cam followers away from camshaft lobes with D15001NU Magnetic Holding Set.
-UN-07NOV88 T90981 CD,3274,G20,7 -19-10MAR92 20 10 CAMSHAFT JOURNAL MEASURE CAMSHAFT JOURNAL SPECIFICATIONS Camshaft journal OD . . . . . . . . . . . . . . . . . 55.872—55.898 mm (2.1997—2.2007 in.) -UN-07NOV88 Maximum wear . . . . . . . . . . . . . . . . . . 55.85 mm (2.199 in.) Max. clearance between bore and camshaft journal . . . . . . . . . . . . . . . . . 0.18 mm (0.007 in.) T81260 If diameter or clearance are more than specified, replace camshaft. IMPORTANT: To keep the initial working condition between cam lobes and cam followers, always replace cam followers when installing a new camshaft. CD,3274,G20,8 -19-01FEB94