Lubrication System/Oil Cooler CTM3274 (01JUL99) 25-19 Saran Liter Engines 060799 PN=180 B. Engine without camshaft-gear-driven auxiliary drive and bracket installed on vertical base of cylinder block. 1. Remove oil filter bracket (A) and oil cooler bracket (B). 2. Clean and check parts. 3. Install oil cooler bracket (B) with a new gasket (C). Tighten cap screws to 50 N·m (35 lb-ft). 4. Install oil filter bracket (A) with a new gasket (D). Tighten cap screws (3 used) to 50 N·m (35 lb-ft). NOTE: Apply sealing compound on thread of cap screw (E). 5. Install new packing (F) between oil cooler (G) and bracket. -UN-25OCT94 6.
Attach oil cooler with holding screw (H), cover (J) and O-rings (K and L). Tighten to 35 N·m (25 lb-ft). 7. Connect coolant lines to oil cooler. CD30409 8. Install oil filter adapter (M). Tighten to 45 N·m (33 lb-ft). A—Oil filter bracket B—Oil cooler bracket C—Gasket D—Gasket E—Cap screw (to be installed with sealing compound) F—Packing G—Oil cooler H—Holding screw J—Cover K—O-ring L—O-ring M—Adapter CD,3274,G25,37 -19-01FEB94 25 19