Lubrication System/High-Flow Oil Pump 5. Attach oil pump assembly to front plate, tightening cap screws (C) to 50 N·m (35 lb-ft). 6. Rotate pump shaft, again making sure that pump gears turn freely. 7. Install pump drive gear (B) and tighten hex. nut (A) to 75 N·m (55 lb-ft). CD7176 -UN-07MAR95 T81782 -UN-09NOV88 8. Secure the nut by applying three center punch marks. NOTE: When installing the oil pump, make sure that crankshaft gear and gear of left-hand balancer shaft are not turned (4-cyl. engines only). CD,3274,G25,40 -19-01FEB94 CTM3274 (01JUL99) 25-32 Saran Liter Engines 060799 PN=193 HIGH-FLOW OIL PUMP REMOVAL 1. Remove oil pan and timing gear cover. 2. Remove nut (A) from pump shaft.
-UN-07MAR95 3. Pull gear (B) from conical shaft of pump, using a suitable puller. 4. Remove two cap screws (C) attaching pump housing CD7276 to front plate. CD,3274,G25,30 -19-30MAR92 25 32