Fuel System/Dynamic Timing INSTALL TIMING SENSOR Install FKM10429-6 timing sensor (E) between No. 1 nozzle and high pressure fuel line. Using two wrenches, tighten sensor and fuel pressure line to 30 N·m (22 lb-ft). CD30673 -UN-20MAY98 CD30195 -UN-07MAR95 IMPORTANT: Timing sensor must be installed at nozzle end of N˚.1 fuel injection line. If access to N˚.1 line is restricted, sensor can be installed on N˚.4 injection line (4-cylinder engines) and N˚.6 injection line (6-cylinder engines). Sensor MUST BE installed on N˚.1 injection line of all 3-cylinder engines. NOTE:
If clearance does not allow proper installation of the timing sensor (E), FKM10429-5 or FKM10465-3 clamp-on transducer (C) can be installed close to injection nozzle. Remove paint on injection line before installation. CD,FKM10429A,2 -19-23FEB98 40 47 CTM3274 (01JUL99) 40-47 Saran Liter Engines 060799 PN=292