Cylinder head and Valves/Valves INSPECT VALVE ROTATORS Insure that valve rotators turn freely in both directions. Replace if defective. T91224 -UN-28OCT88 CD,3274,G05,20 -19-24FEB92 CTM3274 (01JUL99) 05-17 Saran Liter Engines 060799 PN=54 INSTALL VALVES 1. Apply engine oil to valve stems and guides. 2. Insert valves in head (in same location as found -UN-12APR90 during removal). NOTE: Valves must move freely and seat properly. 3. Using JDG678 Valve Stem Seal Installer (A), slide RG5654 seal (B) over valve stem and onto valve guide tower (C). 4. Install valve springs and rotators. 5. Compress valve springs using JDE138 Valve Spring Compressor and install new keepers on valves. NOTE:
After having installed the valves, strike end of -UN-12APR90 each valve three times with a soft mallet to ensure proper positioning of the keepers. RG5655 -UN-07MAR95 CD30233 CD,3274,G05,21 -19-01FEB94 05 17