Ditch Witch HT25 Trencher Service Manual & Operator Guide PDF (EN)

HT25 - SERVICE 1 SERVICE Record serial number and date of purchase in spaces provided. Tractor serial number is located as shown. SERIAL NUMBER RECORD Front Attachment Serial Number: Tractor Serial Number: Engine Serial Number: Date of Manufacture: Date of Purchase: Trailer Serial Number: p SERIAL NUMBER RECORD

Стр. 1

2 HT25 - SERVICE SUPPORT PROCEDURE Order genuine Ditch Witch replacement or repair parts from your authorized Ditch Witch dealer. Use of another manufacturer's parts may void warranty. For information about on-site, individualized training, contact your Ditch Witch dealer. Notify your dealer immediately of any malfunction or failure of Ditch Witch equipment. Always give model, serial number, and approximate date of equipment purchase. This information should be recorded and placed on file by owner at time of purchase. Return damaged parts to dealer for inspection and Warranty consideration.

Contact your Ditch Witch dealer for publications covering operation, service, and repair of your equipment. SUPPORT PROCEDURE p Ditch Witch Training RESOURCES Publications

Стр. 2

HT25 - FOREWORD 3 FOREWORD This manual is an important part of your equipment. It provides safety information and operation instructions to help you use and maintain your Ditch Witch equipment. If you need a replacement copy, contact your Ditch Witch dealer. If you need assistance in locating a dealer, visit our website at www.ditchwitch.com or write to the following address: The descriptions and specifications in this manual are subject to change. The Charles Machine Works, Inc. reserves the right to improve equipment. Some product improvements may have taken place after this manual was published. For the latest information on Ditch Witch equipment, see your Ditch Witch dealer.

Read this manual before using your equipment. Keep it with the equipment at all times for future reference. If you sell your equipment, be sure to give this manual to the new owner. Thank you for buying and using Ditch Witch equipment. The Charles Machine Works, Inc. Attn: Marketing Department PO Box 66 Perry, OK 73077-0066 USA p

Стр. 3

4 HT25 - FOREWORD , Ditch Witch, Jet Trac, Pro Tech, Fluid Miser, Perma-Soil, Modularmatic, Roto Witch, AutoCrowd, and Subsite are registered trademarks of The Charles Machine Works, Inc. Pierce Airrow is a registered trademark of Oklahoma Airrow, Inc. CMW is a trademark of The Charles Machine Works, Inc. by The Charles Machine Works, Inc., Issue Number 1.0/OP-4/00 Operator's Manual Part Number 054-062 Perry, Oklahoma Copyright 2000 p

Стр. 4