11 OPERATING THE ENGINE 2. Set the range gear shift lever to the "NEUTRAL" position. C Check Easy Checker(TM) Lamps: 1. When the key is turned "ON", lamps(2)(3)(4) should come on. If trouble should occur at any location while the engine is running, the warning lamp corresponding to that location comes on. 2. The brake indicator light(1) comes on. (1) While brake is applied and goes off when it is released. (2) When the brake fluid is below the "MIN" mark. (Add the brake fluid to the "MAX" mark.) (See "Checking Brake Fluid Level" in "DAILY CHECK" in "PERIODIC SERVICE" section.) (1) Range gear shift lever (L) LOW Range (H) HIGH Range (N) "NEUTRAL" POSITION (R) "REVERSE" 3.
Insert the key into the key switch and turn it "ON". (1) Brake indicator light (2) Engine diagnostic light (3) Engine oil pressure light (4) Electrical charge light A Daily checks with the Easy Checker(TM) only, are not sufficient. Never fail to conduct daily checks carefully by referring to "DAILY CHECK" in "PERIODIC SERVICE" section. A For further details of Easy Checker(TM), see "Easy Checker(TM)" in "CHECK DURING DRIVING" in "OPERATING THE VEHICLE" section. ( ) "OFF" (Engine-Stop) ( ) "ON" (Engine-Run) ( ) "START" (Engine-Start) 4. Turn the key to the "START" position and release when the engine starts.
A As safety function, the engine will not start unless the range gear shift lever is in the "NEUTRAL" position.