179 179 FRONT WRENCH PRESSURE & RETURN HYDRAULICS 1. 515-527 1 HOSE (10OFX90-54"-3000) 2. 117-657 1 ABRASION SLEEVE (1.59" X 54") 3. 115-813 1 ABRASION SLEEVE (1.59" X 36") 4. 515-498 1 HOSE (10OFX90S-36"-3000) 5. 149-532 1 HYDRAULIC LINE (-12) 6. 149-531 1 HYDRAULIC LINE (-12) 7. 149-530 1 HYDRAULIC LINE (-12) 8. 154-368 1 UN RUN TEE (12OFX-12O-12O) 9. 154-269 1 CONNECTOR (12S-12O) 10. 154-292 1 RUN TEE (12S-12O-12O) 11. 155-222 1 REDUCER (16S-12SF) 12. 149-815 1 TEE (12S-12O-04O, SPECIAL) 13.
149-258 - HYDRAULIC VALVE 191-103 - SEAL REPAIR KIT 191-104 - SEAL REPAIR KIT 499-309 - SOLENOID 499-310 - SOLENOID COIL 499-311 - SOLENOID CARTRIDGE 499-312 - SOLENOID COIL 499-313 - CHECK VALVE 500-703 - SEAL REPAIR KIT 501-872 - SHUTTLE VALVE 14. 108-078 4 BOLT (1/4-NC X 4-3/4", GD. 5) 15. 322-290 2 MOUNT (WELD-ON) 16. 110-411 6 BOLT-ON CLAMP (3/4", SET) 17. 322-289 1 BACKUP (BOLT-ON) 18. 107-420 3 SCREW (M10-1.50 X 140MM) 19. 105-894 3 LOCKNUT(M10-1.50,PRV TRQ,10.9) 20. 303-648 - DRILL FRAME WLDMN'T 21. 309-891 1 BRACKET 22. 154-441 2 REDUCER (10O-12OF) 23. 157-040 2 O-RING (016 D90) 24. 157-039 1 O-RING (014 D90) 25. 106-076 16 WASHER (1/4") REF NO.
PART NUMBER QTY DESCRIPTION REMARKS FOR USE ON 499-311 FOR USE ON 501-872 REPLACEMENT FOR WRENCH ROTATE SECTION REPLACEMENT FOR WRENCH ROTATE SECTION REPLACEMENT FOR THE FRONT AND REAR WRENCH SECTIONS REPLACEMENT FOR THE FRONT AND REAR WRENCH SECTIONS LABELED CV1 AND CV2 ON VALVE BODY FOR USE ON 499-313 LABELED SV1, SV2 AND SV3 ON VALVE BODY NOT SHOWN: FOOTNOTES:
(A) CONNECTS TO TEE IN PARKER THRUST VALVE PRESSURE INLET PORT (B) CONNECTS TO BRANCH TEE ON COOLER INLET TUBE (C) CONNECTS TO BULKHEAD RUN TEE ON TOP OF SUNSTRAND ROTATION PUMP (D) CONNECTS TO SOLENOID VALVE ON DRILL FRAME FOR CHARGE PRESSURE ON "OUTER ROTATION BRAKE HYDRAULICS" (E) CONNECTS TO TANK PORT ON ANCHOR VALVE IN PIVOT FRAME (F) CONNECTS TO PRESSURE PORT ON ANCHOR VALVE IN PIVOT FRAME NOTE: Name?:SAPVersion Name?:SAPName