7 Overview of controls 7.2 Cab / Operator's platform 67083 Observe the general warnings at the beginning of the "Overview of controls" chapter. Z All magnetic pick-ups (J) must be set to a gap of 1 ± 0.5 mm between gear wheels (Z) and the magnetic pick-up. J When the engine is being started, the buzzer sounds briefly until the engine oil pressure has built up. The shaft speed-loss monitors are switched on and off by means of a switch that is activated by the cutterbar drive control mechanism. 19431 23 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 123