10 Fieldwork settings 10.2 Feeder unit 67086 Repeat this process on the other side of the machine. 72798 10.2.3 Adjusting the height of the feeder chain Observe the general warnings at the beginning of the "Fieldwork settings" chapter. Adjust the height of the feeder chain parallel on the left and right at the feed rake conveyor. Slacken off bolts (1). Twist supports by 90° until the dowel pin fits the bore. 23851 4 The supports in the feed rake conveyor have adjusted the feeder chain height. Bolt down bolts (1). 1 B A 5 19596 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 175 Designation A Grain B Maize