1 Introduction 1.1 General Information 67077 71369 1.1.2 Validity of instructions The present Manual applies to the following machine / front attachment: 2475 1.1.3 Specifications Technical data, dimensions and weights are given as an indication only. CLAAS reserves the right to make changes subsequently as technical developments con- tinue. Responsibility for errors or omissions not accepted. 36993 1.1.4 Road traffic regulations Road traffic regulations may vary between countries. In case of discrepancies between the instructions pro- vided by the manufacturer and the traffic regulations of the relevant countries, the traffic regulations of the countries concerned apply.
The information below mainly refers to the Federal Republic of Germany. Before driving on public roads, the self-propelled work- ing machine usually needs an operating permit and a special approval. When driving the self-propelled working machine on public roads and lanes, all conditions of the operating permit and of the special approval must be observed. Documents to be carried on the machine In addition to his driving licence, the operator must always carry the original of the operating permit and of the special approvals. Objects to be carried on the machine A warning triangle must be carried on all self-propelled working machines.
On all commercially used machines, a warning triangle, a warning light and a first-aid box must be carried along. Furthermore, at least one wheel chock must be carried on vehicles with an allowed total weight above 4 t. CLAAS self-propelled working machines are usually equipped with 1 rigid or 2 folding wheel chocks. These may be used on the front wheels only. 18 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 Designation Type Machine serial number from to DOMINATOR 150 200 200 00011 ― DOMINATOR 140 200 200 00011 ― DOMINATOR 130 156 156 00011 ―