10 Fieldwork settings 10.6 Crop receptacle / straw receptacle 67086 Slacken off bolt (21) and swivel straw guide plate (15) downwards. 21 Danger! Risk of injury from sharp knives. Always wear gloves to avoid injuries when removing and installing the knives. Arrest the cutting cylinder so it will not rotate. 15 The free-swinging knives can now be fitted. 28806 28 When the straw guide plate is to be removed com- pletely, the following steps must be carried out. (2 persons are required) Back up straw guide plate (15) and slacken off bolt (21) on both sides. Remove straw guide plate to the rear.
83763 10.6.2 Installing the straw guide plate (straw chopper with standard spreader) Observe the general warnings at the beginning of the "Fieldwork settings" chapter. When installing the completely removed straw guide plate, the following steps must be carried out. (2 persons are required) 21 Bolt down straw guide plate (15) with bolts (21) on both sides. 15 29 28806 (1 persons are required) A Swivel straw guide plate (15) upwards. Fit connecting rod at position (A). Swivel the standard spreader (9) to the desired position. 15 9 30 28802 186 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09