CLAAS Dominator 150 / 140 / 130 — 11.9.1 Putting the straw chopper into operation (swinging the standard spreader to chopping position)

11 Fieldwork 11.9 Crop receptacle / straw receptacle 67087 1 Warning! Pinch points during assembly work. Limbs may be bruised. Keep your limbs away from the hazard area. 8 Lay belt (1) on the inner side of the elevator and install it on pulley (8) via jockey pulley (4). To do this, push down jockey pulley (4). 4 19663 54 Loosen turn locks (9) on both sides. Pull finger rake (10) from its lock, fold it down and let it engage so that the rake makes contact with the spreader. 9 10 55 19670 Lift the sheet metal plate (11) on the left side. Raise the standard spreader until the plates engage in the detents (B) on both sides. Bolt down turn locks (9) on both sides.

B 9 11 56 28707 12 12 Loosen turn locks (12) on both sides. Loosen turn lock (13) on the right side. Move the straw chopper to the rear, using crank (14). At the same time the straw guide plate (15) is swung backwards. 13 15 14 19664 57 224 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09