11 Fieldwork 11.9 Crop receptacle / straw receptacle 67087 Close the right side cover. Switching off the straw chopper function monitor DOMINATOR 130 (optional equipment) The straw chopper speed monitor must be switched off when putting the straw chopper out of operation (swinging the standard spreader to swathing position), using the pull switch (1). 1 When the chopper is standing still while the pull switch is OFF, the horn on the operator's platform produces no horn sound. The straw chopper indicator light in the vehicle information unit is also deactivated.
68 19554 Straw chopper function monitor DOMINATOR 150 / 140 (optional equipment) The straw chopper speed monitor is switched off auto- matically when putting the straw chopper out of operation (swinging the standard spreader to swathing position). 83211 11.9.3 Swinging the standard distributor into the transport trolley transport position Observe the general warnings at the beginning of the "Fieldwork" chapter. Danger! The cutting cylinders of the straw chopper can run on even if the drive is switched off. Death or serious injuries! Never touch any machine parts that con- tinue running. Wait until all machine parts have com- pletely stopped moving. Slacken off toggles (7) on both sides.
Lift the sheet metal plate (8) on the left side. Swing the standard distributor (9) all the way up until the sheet metal plates on both sides snap into the notches (A). Bolt down toggles (7) on both sides. A The transport trolley can now be hitched. 7 9 8 69 19696 228 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09