13 Maintenance 13.2 General Information 67089 13.2 General Information 11089 13.2.1 Front attachment Danger! The front attachment, reel and feeder unit may drop uncontrolled. Death or serious injuries! Apply safety locks. Keep a safe distance from the hazard area. 7791 13.2.2 Cleaning the engine compartment and hazard areas Clean the engine area and above all the exhaust system as well as the areas around the brakes, gearbox and similar components thoroughly in order to avoid fire hazards. When working in very dry crop and very dusty conditions, check the spots mentioned above for dirt accumulations more frequently and clean them if necessary.
7466 13.2.3 Belts Keep all belts well-tensioned at all times. Belts soiled with oil can be cleaned with cleaning lye. Do not use gasoline or similar products. After installing a new belt, check tension after the first 2 to 3 working hours and adjust if necessary. 7467 13.2.4 Variable-speed drives Whenever the variable-speed pulleys have been greased, operate the pulleys a few times to ensure even spreading of grease on sliding parts. Remove any accumulations of dust from between the variable speed pulley halves to make sure the pulleys can be run through their full speed range.
7468 13.2.5 Bolts Check all bolts for a tight seat and retighten if nec- essary (especially all nuts on the chassis and on the steering system). 11103 13.2.6 Lubrication Observe the specified oil change intervals and oil grades in the hydraulic system and in the gearboxes. Use only the specified grease for greasing the machine. Before greasing, remove the dirt on the grease nipple. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 259