13 Maintenance 13.6 Chassis 67089 89477 13.6.2 Checking the tightening torque of wheel nuts / wheel bolts Tighten all wheel nuts / wheel bolts (1) of the machine on the drive axle and the rear axle as specified. 1 9617 59 Drive axle Danger! Wheel bolts / wheel nuts may come loose when not tightened as specified. Death or serious injuries! Retighten all wheel bolts / wheel nuts on new machines and when wheels have been removed and refitted. Observe the maintenance intervals: - immediately after installation. - after the first working hour. - during the first 50 working hours: every 10 working hours. The threads must be clean and free of grease.
Tighten the wheel bolts / wheel nuts crosswise (as numbered on the decal). Observe the tightening torque. 60 Drive axle decal 30848 Use Drive axle 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 307 ing torque of drive axle wheels Designation of thread, type of fastening Wrench size Tightening torque le M22 x 1.5 - 8.8, nut with spring washer C 18.5 DIN 74361 (Limes type conical spring washer) 30 520 Nm