13 Maintenance 13.6 Chassis 67089 Remove screw (1). Collect the used oil in a sufficiently large container. Clean screw (1). Turn in screw (1). Repeat this procedure on the other side of the machine. 1 23392 64 86782 13.6.6 Topping up the final drive oil DOMINATOR 150 / 140 Park the machine on level ground. Observe the general warnings at the beginning of the "Maintenance" chapter. Environment! Lubricants and fuels end up in the environment. Environmental pollution. Lubricants and fuels must be collected and stored in suitable containers and dis- posed of in a way that is harmless to the environment and in accordance with existing anti-pollution regulations. WARNING:
Use of unpermissible spare parts or lubricants. Machine damage or increased wear. Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. Caution! Machine operation with unpermitted or pol- luted lubricants. Machine damage. Ensure a clean environment. Use suitable and clean tools. Use permitted lubricants. Lubricants must be free of pollution. 310 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09