13 Maintenance 13.8 Drive belts / drive chains 67089 WARNING: Use of unpermissible spare parts or lubricants. Machine damage or increased wear. Spare parts and lubricants must at least comply with the technical standards required by the manufacturer of the implement! The use of genuine CLAAS spare parts and lubricants is recommended. Warning! Pinch points during assembly work. Bruises of limbs. Keep limbs out of the hazard area. Use suitable tools. Clean the grooves or the contact faces of pulleys to be free from grease and rust. First put the belt (R7) on the spring-loaded varia- ble speed pulley (2). Pull the belt into the variable-speed pulley (2) until it is fully spread.
Install belt (R7) on the upper variable-speed pulley. Bolt down bracket (3) with bolts (4). Check / adjust the fan speed display. Let the variable-speed drive run up and down through its entire range several times, then check belt tension. 4 1 3 R7 4 95 23404 2 96 23405 332 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09