3 Safety 3.1 General Information 67079 36726 3.1.15 Crop receptacle / straw receptacle Under the guards of the chopping unit dangerous, revolving cutting mechanisms are operating which may run on after the drive has been disengaged. Therefore, always stay a safe distance away from the chopping unit until the unit has come to a com- plete standstill. 36728 3.1.16 Grain delivery The augers located inside the grain tank cannot be shielded completely against accidental contact due to their function. Before mounting or entering the grain tank, make sure that no other person can restart the engine. Enter the grain tank only through the opening pro- vided for this purpose.
2422 3.1.17 Air conditioner The air conditioning system is filled with CFC refrigerant. CFC refrigerants must not be allowed to escape into the atmosphere. - Therefore, please take appropriate precautions when working on the air conditioner. Maintenance and repair work may only be carried out by specialised air conditioning system service workshops. Refrigerant must always be sucked out and disposed of for recycling. 37000 3.1.18 Adjustment and maintenance work The drives on the machine will not be automatically secured from moving after the engine has been switched off. Moreover, when it comes to adjustments, it may be necessary to turn the drives.
For these reasons the following precautions should be observed: Before adjustment, cleaning and maintenance operations and before correcting malfunctions: - Switch off the threshing mechanism. - Switch off the front attachment. - Switch off the grain tank unloading mechanism. - Stop the engine. - Disconnect the battery isolating switch. Before adjustment, cleaning and maintenance operations and before correcting malfunctions at the hydraulic system, lower the front attachment and/or feeder unit all the way. Always turn off the battery isolating switch before carrying out any electrical repairs on the machine. 40 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09