5 Prior to initial operation 5.2 Chassis 67081 5.2 Chassis 89352 5.2.1 Removing / installing the wheels Observe the general warnings at the beginning of the Prior to initial operation chapter. Jack up the machine. Remove / install wheel. Ensure that large tyres cannot tip over, if neces- sary use a carriage. After fitting the wheel, tighten all wheel nuts / wheel bolts (1) to the specified tightening torque as instructed. 1 1 9617 79223 5.2.2 Overview of rear axle Either one or several different types of rear axles are available. The part number for identifying the rear axle is pro- vided on the identification plate of the axle.
Rear axle 00 0770 350 1 27215 2 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 89