126 On-board computer Displaying the operating hours X Press the 9 button. X Press the 9 button. The input window shows a list of all control unit system abbreviations. Displaying diagnostics data X Press the r or s button to select X Press the u button. ICM . X Select the desired control unit using the r or s button. X Press the r or s button to select Values . X Display further details on the control unit by pressing u . X Press the u button. X Press the r or s button to select the desired system: R M3: X h Operating time: hydraul‐ ics circuit 1 Menu window menu Settings menu R M4: X h Operating time:
hydraul‐ ics circuit 2 If you change the settings in the Menu menu window, the changes affect the display of the menu window. On-board computer and displays R M7: X h Operating time: hydraul‐ ics circuit 3 X Use the u or t button to scroll to д settings. R M8: X h Operating time: hydraul‐ ics circuit 4 X To set the units of measurement: press 9 . The input window displays a list of possible settings: R M12: X h Operating time: hydro‐ static drive R M20: X h PTO shaft operating time X Start the engine. Showing the power hydraulics oil level R Speed in km/h or mph R Clock mode in 24 h or 12 h X Park the vehicle on a level surface.
R Distance in km or mi X Make sure that the engine-driven power take-off is disengaged ( Y page 265). X Apply the parking brake. R Liquid units in litres , UK gal or US gal R Temperature units in °C or °F R Average fuel consumption in l/100 km , km/l or mpg X Press the r or s button to select X Press the 9 button. R Pressure units in bar , kpa or psi X Press the u button. ICM . X Select the desired menu bar with the r or s button. R Weight units in t , tn or l.tn X Press the r or s button to select X Press the u button. Values . X Change the setting with the u or t button. X Use the r or s button to select M6: X l Oil level: power hydraulics .
The oil level display of the power hydraulics must show approximately 45 l. Lighting menu window You can set the brightness of the instrument cluster, the switch and the audio display in the Lighting menu window. You can only adjust the brightness of the instrument cluster and the switch if the light sensor of the instrument cluster has detected X Top up the difference in quantity of the oil ( Y page 299).