Telligent ® automatic gearshift 181 Rapid changes of direction found in the "Telligent ® gearshift" section ( Y page 168). Folding out the clutch pedal Vehicles without dual-mode steering Driving mode At speeds of up to approximately 30 km/h, you can preselect a reverse or forward gear while driving. To change the direction of travel X Turn the direction switch to the h (drive/ forward gear) or k (reverse gear) posi- tion : . From the 1st forward gear, the 1st reverse gear is preselected, and vice versa. From the 2nd forward gear, the 2nd reverse gear is preselected, and vice versa. From the 3rd or higher forward gear, the 3rd reverse gear is selected.
From the 3rd or higher reverse gear, the 3rd forward gear is selected. The gear is engaged as soon as the vehicle comes to a near standstill. The gear change is complete when the on-board computer display shows the gear. X Pull release catch : . Clutch pedal ; folds out. X Depress clutch pedal ; fully. Pressure builds up in the clutch actuation system. The Clutch pedal folded down mes- sage appears in the on-board computer dis- play. Telligent ® automatic gearshift switches to manual drive program M . X Slowly release clutch pedal ; . Vehicle with dual-mode steering Clutch pedal General notes !
When the clutch pedal is depressed the first time after folding it out, pressure builds up in the clutch system. If a gear is selected, the vehicle pulls away as the clutch pedal is released. After folding out the clutch pedal, release it cautiously. If the clutch pedal is folded out, you have to depress the clutch and change gears man- ually to drive. Further information can be Z