Driving systems 197 Do not use the front camera, reversing cam- era or device camera under these circum- stances. You may injure others or cause dam- age to objects and the vehicle while parking. You see the reversing camera image on the monitor display : if: R the key is in position 2 in the ignition lock and Front camera R you turn the direction of travel selection switch to the k (reverse) position You see the previous display on the monitor display when the function is switched on, as soon as you: The front camera is an optical parking and manoeuvring aid. It shows you the area in front of the vehicle on the monitor.
It enables a simplified view of the pocket of the front mounting plate and provides an extended field of vision in front of the vehicle. R turn the direction of travel selection switch to the i (neutral) position Driving mode R drive forwards briefly Additional information on the monitor is inclu- ded in the manufacturer's operating instruc- tions. Device camera General notes The device camera is an optical aid for the purposes of device monitoring. In order to be able to see the device camera image on the monitor display, you must switch on the device camera ( Y page 198). Additional information on the monitor is inclu- ded in the manufacturer's operating instruc- tions.
The monitor switches off automatically at a speed of approximately 15 km/h. At a speed of approximately 10 km/h, it switches back on. Change the speed; additional information on the monitor can be found in the manufac- turer's operating instructions. : Front camera Connecting the device camera The foot of the camera is magnetic. There- fore, the device camera can be attached to all metallic parts freely. Reversing camera The reversing camera is an optical parking and manoeuvring aid and shows the area behind the vehicle on its monitor. Z