204 Hydrostatic drive system X To activate working mode cruise con- trol at speeds slower than the stored speed: press the q button briefly. Status indicator ? appears with a blue arrow in the on-board computer. X Release the accelerator pedal. This maintains all speeds ranging from 0 km/h up to the stored speed. The stored speed will not be exceeded. In order to maintain the currently stored speed, working mode cruise control auto- matically brakes or accelerates the vehicle.
Driving mode С To activate and adjust current speed/ increase set speed q To activate and call up stored speed/ reduce set speed o To deactivate working mode cruise con- trol X To activate working mode cruise con- trol with the cruise control lever and to set speeds: drive with the cruise control lever ( Y page 205). X Activation requirements: activate the hydrostatic drive system ( Y page 199). X To deactivate working mode cruise con- trol: press the o button briefly. Status indicator ; , = or ? goes out in the on-board computer. X Make sure that "work" mode is selected ( Y page 202). Working mode cruise control is deactivated automatically if:
X To activate working mode cruise con- trol and store a speed: drive at the desired speed and briefly press the С button. Status indicator ; appears in the on-board computer. Working mode cruise control is activated. The speed you are driving at is saved. R you brake sharply R a door is opened Work limiter The work limiter can be used in conjunction with working mode cruise control. When you have activated the work limiter, you have the possibility of entering a load value for the die- sel engine. If, during working operation, this load value is reached while using attached equipment, a red arrow appears in the status indicator.
The vehicle speed is then reduced below the stored speed of the working mode cruise control. The speed of the diesel engine remains the same, however. This serves to prevent the mechanical device protection on your attached equipment from being trig- gered. The stored speed of the working mode cruise control and the load value must be adapted to the corresponding working oper- ation. X Release the accelerator pedal. In order to maintain the stored speed, working mode cruise control automatically brakes or accelerates the vehicle. X Release the accelerator pedal. X To activate working mode cruise con- trol at speeds faster or the same as the stored speed: press the q button briefly.
X Release the accelerator pedal. Status indicator ; appears in the on-board computer. The vehicle is decelerated to the stored speed. In order to maintain the stored speed, working mode cruise control automatically brakes or accelerates the vehicle.