Hydrostatic drive system 207 Driving with the control lever To activate the control lever for driving mode: X Select the Joystick function in the on- board computer ( Y page 241). The following functions can now be carried out using the control lever. X Engage the hydrostatic drive system ( Y page 199). The ж indicator lamp in the status area of the on-board computer lights up. Driving mode X Press red button A . To accelerate forwards: X Move the control lever in direction B . To decelerate in forward mode: : u button, changes direction ; F button, sets engine speed = Yellow button, adjusts settings ?
Black button, calls up menus A Red button, calls up acceleration or decel- eration functions B Drives forwards or reduces speed when reversing C Reverses or reduces speed when driving forwards D Blue button, in hydrostatic drive mode, activates operation of red hydraulic con- nections 1, 2 or green hydraulic connec- tions 3, 4; see working hydraulics ( Y page 244) E White button, activates the operation of yellow hydraulic connections 5, 6 or blue hydraulic connections 7, 8; see working hydraulics ( Y page 244) X Press red button A . X Move the control lever in direction C . The braking effect is limited, and, if neces- sary, the service brake must also be used. To accelerate in reverse:
X Press red button A . To decelerate in reversing mode: X Move the control lever in direction C . X Press red button A . X Move the control lever in direction B . The braking effect is limited, and, if neces- sary, the service brake must also be used. X Press red button A . Change of direction X Move the operating lever in direction B or C . or X Press the u button : forwards or back- wards. Stationary vehicle: the direction of travel is changed immediately. While driving: the vehicle decelerates. When the vehicle is stationary, the control lever must be moved again. Depending on the selected vehicle equip- ment, your vehicle may be equipped with a control lever.
If the hydrostatic drive system is activated, the following functions can be operated with the control lever: Z