242 Menus and input windows in the on-board computer be accelerated and decelerated using the control lever ( Y page 207) X To switch the function on: press the u button. The checkbox next to the function is marked. or R Work Drive : if the hydrostatic drive sys- tem has been activated, you can switch between "drive" mode and "work" mode ( Y page 202). X To switch on the desired function: press the u button. The checkbox next to the desired function is marked. or X To switch the function off: press the u button. The checkbox next to the function is no longer marked. X Press the 9 button. The Automatic selection window closes. Hydraulic system X To switch off the desired function:
press the u button. The checkbox next to the desired function is no longer marked. "Settings", "Save" menu windows X Press the 9 button. The Function button selection window closes. If you are working with several pieces of equipment, you can save all the settings for two pieces of equipment in their own single profile. You can then load the profile for that equipment anytime ( Y page 239). The following settings are saved in one pro- file:
"Settings", "Automatic" menu win- dows R the limits of the hydraulic connections; see "Settings", "Limits" ( Y page 240) R the function assignment of the blue button on the control lever; see "Settings", "Func- tion button" ( Y page 241) R the automatic function of the snow plough; see "Settings", "Automatic" ( Y page 242) R the load relief function value for the snow plough load relief; see the "Hydraulics" input window ( Y page 237) R the flow rates for continuous consumers, working hydraulics circuit and power hydraulics circuit; see the "Hydraulics" input window ( Y page 237) R the working speed; see Constant working speed mode ( Y page 263) X Call up the Settings menu window ( Y page 240).
R in hydrostatic operation, the pulling-away gear for driving modes "drive" and "work"; see Driving with the hydrostatic drive sys- tem ( Y page 201) X Press the r or s button to select the Automatic entry. X Press the 9 button. The Automatic selection window appears. R the stored speed for working mode cruise control ( Y page 203) R the load value; see Working limiter ( Y page 204) Structural sequence in the on-board com- puter Selection Operation and main- tenance â Hydraulics Working func‐ tions Settings Automatic Snow plough