Tipper platform 279 X To enable the tipping function: press switch : . Indicator lamp ; in the switch lights up. The Y Joystick aktiv (Joystick active) message appears in the on-board computer display. The е indicator lamp in the status area of the on-board computer lights up. The raise/lower tipper platform control lever function is enabled. place until the tipper platform has reached the desired position. The Y indicator lamp in the status area of the on-board computer lights up. X To lower the tipper platform: make sure that the key is in position 2 in the ignition lock. X Press control lever ? in direction A and hold it in place until the tipper platform has reached the desired position.
When the tipper platform is fully lowered, the Y indicator lamp in the status area of the on-board computer goes out. X To disable the tipping function: press switch = . Indicator lamp ; in the switch goes out. The raise/lower tipper platform control lever function is disabled. X Disable the tipper function ( Y page 278). Raising/lowering the tipper platform trailer Working mode Raising/lowering the tipper platform vehicle X Start the engine. X Start the engine. X Enable the tipping function ( Y page 278). X Enable the tipping function ( Y page 278). X Ensure that in vehicles with a tipper plat- form trailer, switch D is pressed. X Press switch C .
The tipper platform trailer can be raised or lowered. X To raise the tipper platform: press con- trol lever ? in direction B and hold it in X To raise the tipper platform: press con- trol lever ? in direction B and hold it in Z