Seats 67 Seat angle X Pull lever ; up and hold it. Swivel seat X Apply pressure to or relieve pressure from the seat cushion or backrest in order to move it to the desired position. Overview X Release lever ; . Seat height X Pull lever = up or push it down to the desired level. The seat rises or lowers. Driver's workstation EASY-ENTRY/EXIT feature Always use the EASY-ENTRY/EXIT feature when getting out of the vehicle. X Push lever ? downwards. The seat is lowered completely. X Pull lever ? upwards. The seat returns to the previously set height. X Make sure that the key is in position 2 in the ignition lock. It is possible to carry out all possible seat adjustments. X Lower lumbar support:
press the upper or lower section of switch A . The lower lumbar support is increased or decreased. Lumbar support X Make sure that the vehicle is at a complete standstill and cannot roll away. Adjusting the head restraints X Upper lumbar support: press the upper or lower section of switch B . The upper lumbar support is increased or decreased. X Pull head restraint A up or push it down to the desired height. X Push head restraint A back or pull it for- wards to the desired angle. Seat armrests X If necessary, fold up seat armrests B . X Use the handwheel on the underside to set the angle of seat armrests B . Seat angle X Pull lever C up and hold it.
X Apply pressure to or relieve pressure from the seat cushion in order to move it to the desired position. X Release lever C . Z