Features 95 Changes the installation position of the control lever and hydraulic sys- tem controls X Unscrew electrical plug-type coupling D of control lever ? and separate. X Mark cable connector A at the corre- sponding sockets of hydraulic system con- trols = and remove. X Place control lever ? and hydraulic system controls = in front of the alternative open- ing. X Connect plug-type coupling D of control lever ? and tighten. X Attach cable connector A to the marked sockets of hydraulic system controls = . Driver's workstation X Position lugs B to the rear and press hydraulic system controls = forwards and downwards until it engages.
X Position lugs C to the rear and press con- trol lever ? forwards and downwards until it engages. Cable guides Cable ducts on the cab rear wall X Press release catch ; firmly and pull con- trol lever ? up and out in the direction of the arrow. X Press release catch : firmly and pull hydraulic system controls = up and out in the direction of the arrow. Cable guide in the engine compartment Z