Delphi — Replace Unit Injector Sleeve in Cylinder Head Using JDG1184

Cylinder Head and Valves Replace Unit Injector Sleeve in Cylinder Head Using JDG1184 Remove Injector Sleeve NOTE: EUI sleeve can be removed from the cylinder head with head removed or installed on engine using JDG1184 Nozzle Sleeve Replacement Set. 02 020 45 TS281 –UN–23AUG88 IMPORTANT: Whenever EUI is replaced, sleeve in cylinder head must be replaced also. Service Cooling System Safely CAUTION: Do not drain coolant until the coolant temperature is below operating temperature. Always loosen coolant drain valve (A) slowly to relieve any excess pressure. 1. Attach a long hose to drain valve (A). Drain coolant into a clean container to a level below cylinder head.

RG8708A –UN–21JUL99 A—Coolant Drain Valve Continued on next page Drain Coolant DPSG,OUO1004,929 –19–16JUL99–1/15 CTM100 (06APR04) 02-020-45 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=117