CTM100 (06APR04) 02-030-55 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=195 Cylinder Block, Liners, Pistons, and Rods Complete Final Assembly NOTE: Refer to the proper group for installation of 6. Adjust clearances, preloads, and gear backlash. components. (Groups 020, 040, 050.) 1. Coat threads of oil gallery plugs with LOCTITE 242 7. Install remaining fuel injection system components. Thread Lock and Sealant. Install plugs and tighten (CTM115 Section 02, Group 090 or CTM188 to specifications. Section 02 Group 090 and 091.) Specification 8. Install the coolant pump and water piping. (See Oil Gallery Plug—Torque..........................................
20 N•m (15 lb-ft) INSTALL COOLANT PUMP in Group 070.) Main Oil Gallery (Front) Expansion Plug—Installed 9. Install lubrication system components. (Group 060.) Depth......................................................... Flush—1.5 mm (0.059 in.) Below Surface 10. Install crankshaft pulley. (See INSTALL 2. Install oil pickup tube. (See REMOVE AND CRANKSHAFT VIBRATION DAMPER AND INSTALL OIL PICKUP TUBE in Group 060.) Install FRONT OIL SEAL in Group 040.) oil pan. (See INSTALL ENGINE OIL PAN in Group 060.) 11. Install the exhaust manifold. (See REMOVE, INSPECT AND INSTALL EXHAUST MANIFOLD in 3. Install the cylinder head using new head gasket. Group 080.) Install intake assembly.
(See (See INSTALL CYLINDER HEAD in Group 020.) REMOVE, INSPECT AND INSTALL INTAKE MANIFOLD in Group 080.) 4. Install camshaft and valve train. (See REMOVE AND INSTALL CAMSHAFT in Group 050.) Install 12. Install starter motor. (See REMOVE AND timing gear cover. (See INSTALL TIMING GEAR INSTALL STARTER MOTOR in Group 100.) COVER in Group 040.) 13. Install alternator. (See REMOVE AND INSTALL 5. Install electronic unit injectors. Refer to the ALTERNATOR in Group 100.) appropriate fuel system repair manual. 14. Install fan and fan belts. (See Machine Technical Delphi/Lucas ECU controlled fuel systems: Manual.) • See REMOVE AND INSTALL ELECTRONIC 15. Fill engine with clean oil.
(See DIESEL ENGINE UNIT INJECTORS in CTM115, Section 02, Group OIL in Section 01, Group 002.) Service engine 090. with coolant. (See DIESEL ENGINE COOLANT RECOMMENDATIONS in Section 01, Group 002.) John Deere Level 6 ECU controlled fuel systems: 16. Perform engine break-in. (See PERFORM • See REMOVE AND INSTALL ELECTRONIC ENGINE BREAK-IN in Group 010.) UNIT INJECTORS in CTM188, Section 02, Group 090. (Dual rail fuel systems) • See REMOVE AND INSTALL ELECTRONIC UNIT INJECTORS in CTM188, Section 02, Group 091. (Single rail fuel systems) LOCTITE is a registered trademark of Loctite Corp. RG,RG34710,138 –19–30AUG02–1/1 02 030 55