Delphi — Remove and Install Camshaft

CTM100 (06APR04) 02-050-15 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=255 Camshaft and Timing Gear Train 7. Install fuel supply pump drive coupler (A) onto camshaft drive pin so that coupler is flush to 0.5 mm (0.020 in.) above pin. Apply LOCTITE 242 Thread Lock and Sealer to set screws. Install set screws with the centerline of one screw –UN–11DEC97 perpendicular to flat on drive pin. Tighten set screws to specifications. Specification RG8822A Camshaft and Supply Pump Drive Coupler Set Screw—Torque............................................... 4 N•m (3 lb-ft) Installing Supply Pump Drive Coupler 8. Install fuel supply pump. Refer to the appropriate fuel system repair manual.

A—Fuel Supply Pump Drive Coupler Delphi/Lucas ECU controlled fuel systems: • See REMOVE AND INSTALL FUEL SUPPLY PUMP in CTM115, Section 02, Group 090. John Deere Level 6 ECU controlled fuel systems: • See REMOVE AND INSTALL FUEL SUPPLY PUMP in CTM188, Section 02, Group 090 (dual rail fuel systems). • See REMOVE AND INSTALL FUEL SUPPLY PUMP in CTM188, Section 02, Group 091 (single rail fuel systems). Specification Fuel Supply Pump-to-Cylinder Head—Torque................................................................. 50 N•m (37 lb-ft) LOCTITE is a registered trademark of Loctite Corp. Continued on next page RG,RG34710,191 –19–25OCT00–10/14 02 050 15