Delphi — Inspect Camshaft Position Sensor Lobe

Camshaft and Timing Gear Train Measure Camshaft Lobe Lift Height Measure each camshaft lobe at its highest point (lobe lift) and at its narrowest point (base circle). Subtract narrowest from highest height to find cam lobe lift. 02 050 20 If camshaft lobe lift is not within specification on any one lobe, replace camshaft. RG8386 –UN–21MAY98 Camshaft Lobe—Specification Intake Lobe—Lift 8.73—8.99 mm (0.343—0.353 in.) ................................. Exhaust Lobe—Lift 7.93—8.19 mm (0.312—0.322 in.) .............................. EUI Lobe 10.5 L Engines and 12.5 L Engines ( —29999)—Lift 14.16—14.42 mm (0.557—0.567 in.) ........... Measuring Camshaft Lobe Base Circle EUI Lobe 12.5 L Engine S.N.

(30000— )—Lift 16.09—16.35 mm (0.633—0.643 in.) ..................................... RG8387 –UN–21MAY98 Measuring Camshaft Lobe Lift RG,RG34710,194 –19–25OCT00–1/1 Inspect Camshaft Position Sensor Lobe Visually inspect camshaft position sensor lobe slots (A) for damage or chips that may emit a false reading. Replace camshaft as necessary. RG8385A –UN–09DEC97 A—Lobe Slots Inspecting Camshaft Sensor and Timing Slots RG,RG34710,195 –19–30SEP97–1/1 CTM100 (06APR04) 02-050-20 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=260