Cooling System Install Coolant Pump 1. Install a new O-ring (A) on coolant pump mounting flange. Coat O-ring with clean engine oil. 02 070 2. Position thermostat housing-to-coolant pump bypass hose onto tube on coolant pump. 10 RG8261A –UN–06DEC97 3. Install coolant pump to front plate. Be careful not to cut or damage O-ring. NOTE: Apply LOCTITE 242 Thread Lock and Sealer (TY9473) to coolant pump cap screws before installing. Installing Coolant Pump A—O-Ring 4. Install three coolant pump-to-front plate cap screws and tighten to specifications. Specification Coolant Pump-to-Front Plate Cap Screws—Torque 50 (37 lb-ft) .............................................................. 5.
On engines with removable coolant pump inlet elbow, install elbow and tighten cap screws to following specifications. Specification Coolant Pump Inlet Elbow to Housing Cap Screws—Torque 41 (30 lb-ft) ........................................ 6. Install oil cooler and housing assembly. (See INSTALL OIL COOLER/OIL FILTER VALVE HOUSING ASSEMBLY OR OIL COOLER COVER/VALVE HOUSING ASSEMBLY in Group 060.) 7. Install all hoses and tighten hose clamps securely. Specification Coolant Bypass Hose Clamp— Torque 6 (4.5 lb-ft) ..............................................................................
Oil Cooler-to-Coolant Pump Hose Clamp—Torque 9 (7 lb-ft) ................................................................... LOCTITE is a registered trademark of Loctite Corp. RG,RG34710,231 –19–29NOV00–1/1 CTM100 (06APR04) 02-070-10 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=294