IMPORTANT: Use only moderate hand force 4 pounds) on each end of shaft. 3. Next, pull up on the compressor end of the shaft and press down on the turbine end while rotating shaft. Neither the compressor wheel nor the turbine wheel should contact the housing at any point. RG8498B –UN–10DEC97 NOTE: There will be some because the bearings inside the center housing are free floating. Checking for Contact of Compressor and Turbine Wheels Continued on next page DPSG,OUO1004,945 –19–28JUL99–12/13 CTM100 (06APR04) 02-080-11 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=311 Air Intake and Exhaust System Turbocharger Bench Test 1. Mount the turbocharger in a vise. 2.
Rotate the shaft, using both hands, to check rotation and clearance. The shaft should turn freely; however, –UN–10DEC97 there may be a slight amount of drag. RG8498A Checking Shaft Rotation and Clearance DPSG,OUO1004,945 –19–28JUL99–11/13 02 080 11