Delphi — How the Turbocharger is Lubricated

How the Turbocharger is Lubricated Engine oil under pressure from the engine lubrication system is pumped through a passage in the bearing housing and directed to the bearings, thrust plate, and thrust sleeve. Oil is sealed from the compressor and turbine by a piston ring at both ends of the bearing housing. RG8099 –UN–18NOV97 The turbocharger contains two floating bearings. These bearings have clearance between the bearing OD and the housing bore as well as clearance between the bearing ID and the shaft OD. These clearances are lubricated by the oil supply (A) and the bearings are protected by a cushion of oil.

Discharge oil (B) drains by gravity from the bearing housing to the engine crankcase. Turbocharger Lubrication A—Pressure Oil B—Discharge Oil RG,RG34710,1524 –19–30SEP97–1/1 CTM100 (06APR04) 03-120-13 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=345 Base Engine Operation Turbocharger Operation The turbocharger, which is basically an air pump that is driven by exhaust gases, allows the engine to produce added power without increasing displacement. Turbochargers are specially matched for the power ratio requirements of each specific application. The turbine wheel (C) is driven by the hot engine exhaust 7MAR98 gases.

These gases flowing through the turbine housing (B) act on the turbine wheel causing shaft (A) to turn. –UN–2 Compressor wheel (E) brings in filtered air and discharges RG9098 the compressed air into the intake manifold where it is then delivered to engine cylinders. Turbocharger Components A—Shaft Engine oil under pressure from the engine lubrication B—Turbine Housing system is forced through passages in center housing (D) C—Turbine Wheel to bearings. D—Center Housing E—Compressor Wheel F—Compressor Housing RG,RG34710,1523 –19–30SEP97–1/1 03 120 13