CTM100 (06APR04) 04-150-1 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=349 Group 150 Observable Diagnostics and Tests About this Section of the Manual This section of the manual contains necessary these symptoms, the problems are arranged in the information to diagnose problems with the base engine most likely or easiest to check first. Symptoms lubrication and cooling systems. This section is divided arranged in both formats refer to testing procedures in into two areas: diagnosing malfunctions and testing the second part of this section. The second part of this procedures.
The diagnosing malfunction areas are section of the manual contains the following testing further divided into the following headings, containing procedures: the following symptoms: • Lubrications System Testing Procedures: • (L) Diagnosing Lubrication System Malfunctions: – Check engine oil pressure – L1 - Excessive oil consumption – Check for excessive crankcase pressure (blow-by) – L2 - Engine oil pressure high – Check for turbocharger oil seal leak – L3 - Engine oil pressure low • Cooling System Testing Procedures:
• (C) Diagnosing Cooling System Malfunctions – Inspect thermostat and test opening temperature – C1 - Coolant temperature above normal – Pressure test cooling system and radiator cap – C2 - Coolant temperature below normal – Check for head gasket failures – C3 - Coolant in oil or oil in coolant • Air Supply and Exhaust Systems Testing Procedures Procedures for diagnosing some of the above – Measure intake manifold pressure (turbo boost) symptoms are formatted such that a test or repair is – Check for intake and exhaust restrictions recommended, then based on the results another test – Test for intake air leaks or repair is recommended.
Other symptoms are – Check for exhaust air leaks formatted in a symptom - problem - solution format. In OUO1004,0000BE7 –19–06NOV00–1/1 04 150 1