Observable Diagnostics and Tests Dynamometer Test 1. Connect engine to dynamometer using manufacturer’s instructions. 6. Compare readings taken with power rating level for your engine application in Section 06, Group 210. 2. Operate engine at one-half load until coolant and crankcase oil temperatures are up to normal. NOTE: Refer to appropriate machine technical manual for average power ratings of vehicle applications. Allow ± 5% for minimum and maximum power. Altitude and temperatures can also affect power levels. (See DYNAMOMETER TEST SPECIFICATIONS in Section 06, Group 210.) 3. Run engine at fast idle. 4. Gradually increase load on engine until speed is reduced to rated speed rpm. 5.
Read horsepower on dynamometer and record reading. 04 150 9 RG,RG34710,1062 –19–13OCT00–1/1 CTM100 (06APR04) 04-150-9 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=357