Engine Rebuild Guide, Break-In and Tune-Up Engine Lifting Procedure 1. Install R503481 (OEM & AT801 Applications Only) or R128001 Front Lift Strap and R128000 Rear Lift Strap (or attach sling to front plate lift eye) and tighten cap screws to specification. 02 010 4 Specification Engine Lift Strap Cap Screws— Torque 90 (66 lb-ft) ............................................................................. RG10349 –UN–13OCT99 NOTE: Lift spacing on sling is adjustable. Position each lifting point so that engine hangs level when lifted. 2. Attach the JDG23 Engine Lifting Sling (D) to lift straps and overhead hoist or floor crane of adequate lifting capacity. Engine Lift Points 3.
Carefully lift engine to desired location. A—Alternator B—Front Plate Lift Eye C—Exhaust Shield D—JDG23 Lift Sling E—R128000 Rear Lift Strap 1 F—R503481 (OEM & AT801 Applications Only) or R128001 Front Lift Strap 1 RG10350 –UN–13OCT99 1 Can be ordered from parts catalog. Engine Lifting Continued on next page RG,RG34710,47 –19–20AUG02–1/2 CTM100 (06APR04) 02-010-4 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=52