01.8 Removal and installation of engine parts 352/352 A 5 Attach lube lines to air compressor and air corn· pressor to bracket. Tighten with reference to 1.4/1 for tightening torque. 6 Coat flywheel housing with sealant No. 3 apply sealant No. 4 to bolts and then tighten. See 1.411 for tightening torque. 7 Attach and tighten flywheel, referring to 1.411 for tightening torque. 8 Using special tool No. 6 attach and tighten clutch. See 25.10-1.4/1 for tightening torque. 9 Coat clutch housing with sealant No. 2, apply locking fluid No. 1 to bolts and then tighten. See 25.10-1.4/1 for tightening torque. 10 I nstall engine, referring to 2.1/1. 2.2/4