Disassembly and assembly of cylinder head 01.8 352/352 A 5 Fit valves, see 05.8-2.2/1. 6 Tighten thrust screw for injector nozzle with special tool No. 4. Tightening torque, see 1.4/1. 7 Fit leak-off pipes with new sealing pieces. Tightening torque, see 1.4/1. Note: Fit locking bolt (24 mm) with sealant No. 5. 8 Fit injector pipes, fit locking bolt (24 mm) with sealant No. 5, renew rubber seals at the bushings and tighten locking bolt (17 mm). 9 Tighten without tensioning the injector pipes using special tool No. 15. Tightening torque, see 1.4/1. 10 Fit exhaust manifold and coolant rail with new gaskets. Tightening torque, see 1.4/1. 11 Install cylinder head, referring to 4.1/1.
UKD 30 40221 42-01 5.1/3