12. OPERATION ADJUST SEAT BELT WARNING Before fitting the seat belt, check that there is no abnormality in the mounting bracket and mounting belt of the belt. If the belt is worn or damaged, replace it. Always fasten the seat belt before starting operations. Always wear the seat belt during operations. Do not twist the left or right side of the seat belt when fastening it. It is dangerous to fit or adjust the seat belt when you are traveling. Always fit the seat belt and adjust it properly before starting. NEVER adjust it while traveling. Always fit the lap belt so it fits across your lap. It is dangerous to fit it across your waist.
You may be subjected to strong pressure if the machine should meet with an emergency. Fastening and removing belt 1. Sit on the seat, depress the brake pedal fully, and adjust the seat so that your back is pressed against the backrest. 2. Sit on the seat, take buckle 1 and tongue 3 in your left and right hands, insert tongue 3 into buckle 1 , and pull the belt to check that it is securely locked. 3. When removing the belt, press button 2 of buckle 1 to release the belt. Adjust the length of the buckle and tongue so that the belt follows your body without twisting, and adjust so that the buckle is in the middle at the front of your body. 2-61