12. OPERATION 6. Maintain the same condition and wait. After approx. 12 seconds, the preheating is completed and cold start pilot 4 changes to flashing. Keeping the hand on APS switch 3 causes flashing to continue. 7. Depress accelerator pedal 5 about half way. 8. Turn the key to the START position and start the engine. NOTICE If the key is turned to the START position when the preheating monitor is still lighted up in Step 8, the glow plug will become wet and ignition will become impossible, so it will be difficult to start the engine. 9. When the engine starts, release the key in the starting switch. The starting switch will automatically return to the ON position. 10.
After the engine starts, when the engine rotation is smooth and the exhaust gas color is normal, release APS switch 3 . REMARK The length of time before the APS switch is released depends on the ambient temperature, so use the following as a guide. Ambient Time between starting engine and releasing APS switch temperature AE617420 15 – 0°C 1 – 2 min Below 0°C 3 – 5 min 2-66