15. LONG TERM STORAGE 15.3 AFTER STORAGE NOTICE If the machine is stored without carrying out the monthly rust prevention operation, request your Komatsu distributor for service. Carry out the following procedure when taking the machine out of long-term storage. Wipe off the grease from the hydraulic cylinder rods. Add oil and grease to all places. 15.4 PRECAUTIONS BEFORE TRAVELING AFTER LONG-TERM STORAGE 1. Check all the oil and water levels before traveling. 2. When traveling after long-term storage, travel forward at a speed of 10 - 15 km/h (6.2 - 9.3 MPH) for 5 minutes or 1 km to run the machine in, then change to normal travel. 2-103