24. SERVICE PROCEDURE CHECK OF INFLATION OF PRESSURE OF TIRES AND INFLATION OF THEM WARNING When inflating a tire, check that any person will not enter the working area and use an air chuck which has a clip and which can be fixed to the air valve. While inflating the tire, check the inflation pressure occasion- ally so that it will not rise too high. If the rim is not fitted normally, it may be broken and scattered while the tire is inflated. Accordingly, place a guard around the tire and do not work in front of the rim but work on the tread side of the tire. Abnormal drop of inflation pressure and abnormal fitting of the rim indicate a trouble in the trouble or rim.
In this case, be sure to ask a tire repair shop for repair. Be sure to observe the specified inflation pressure. Do not adjust the inflation pressure of the tires just after high- speed travel or heavy-load work. Check Measure the inflation pressure with a tire pressure gauge while the tires are cool before starting work. Inflation of tires Adjust the inflation pressure properly. When inflating a tire, use an air chuck which can be fixed to the air valve of the tire as shown in the figure. Do not work in front of the rim but work on the tread side of the tire. The proper inflation pressure is shown below.
HD465-5 Tire size Inflation pressure 24.00-35-36PR (standard) 0.44 MPa (4.5 kgf/cm 2 , 63.9 PSI) 24.00R35flfl (if equipped) 0.69 MPa (7.0 kgf/cm 2 , 99.4 PSI) 21.00-35-36PR (if equipped) 0.54 MPa (5.5 kgf/cm 2 , 78.1 PSI) 21.00-35-32PR (if equipped) 0.49 MPa (5.0 kgf/cm 2 , 71.0 PSI) HD605-5 NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 – +0.03 MPa (0.3 kgf/cm 2 , 4.3 PSI) of the value in the table above. 3-37 Tire size Inflation pressure 24.00R35flfl (standard) 0.69 MPa (7.0 kgf/cm2, 99.4 PSI) 24.00-35-36PR (if equipped) 0.44 MPa (4.5 kgf/cm2, 63.9 PSI)