Safety Add and Operate Attachments Safely Always verify compatibility of attachments by contacting your authorized dealer. Adding unapproved attachments may affect machine stability or reliability, and may create a hazard for others near the machine. that all connections are secure and attachment responds properly to controls. Carefully read attachment manual and follow all instructions and warnings. In an area free of bystanders and obstructions, carefully operate attachment to learn its characteristics and range of motion. Ensure that a qualified person is involved in attachment installation. Add guards to machine if operator protection is required or recommended.
Verify TX03679,00016F0 –19–24JAN07–1/1 Prevent Unintended Detonation of Explosive Devices Avoid serious injury or death from an explosion hazard. Deactivate all cellular or radio frequency devices on equipment stored or operating in an area, such as a blasting zone, where the use of radio transmitting devices are prohibited. TX1023216 –UN–07MAY07 VD76477,0001543 –19–08JAN08–1/1 TM2361 (24JUN08) 9000-01-11 450DLC Excavator Operation and Tests 062608 PN=19 Use Special Care When Lifting Objects Never use this machine to lift people. –UN–27SEP00 Never lift a load above another person. Keep bystanders clear of all areas where a load might fall if it breaks free.
Do not leave the seat when there is a raised load. T133839 Do not exceed lift capacity limits posted on machine and in this manual. Extending heavy loads too far or swinging over undercarriage side may cause machine to tip over. Use proper rigging to attach and stabilize loads. Be sure slings or chains have adequate capacity and are in good condition. Use tether lines to guide loads and prearranged hand signals to communicate with co-workers. TX03679,00016E1 –19–03JAN07–1/1 9000 01 11