TM2361 (24JUN08) 9015-05-5 450DLC Excavator Operation and Tests 062608 PN=347 System Information 1—Wire Number 5—Wiring Diagram Wire 7—Connector End View 11—Wire Number 2—Wire End #1 Termination Legend 8—Wire Number 12—Wire Color Location 6—Component Identification 9—Connector Pin Number 13—Wire Termination Location 3—Wire Color Number 10—Connector Pin Number 14—Wire Harness 4—Wire End #2 Termination Location Wiring Diagram A wire legend (5) is provided for each harness. All wires in the harness are listed in the wire legend. The Each harness on the machine is drawn showing wire legend contains a wire number (1), End #1 (2), components, connectors, and wires.
Harnesses are wire color (3), and End #2 (4) information for each identified by a “W” component identification number wire. The wire number and color are unique to each and description (W6 ENGINE HARNESS, Etc.). harness and may not match other wire numbers and colors on other harnesses. The component A component or connector identification number (6) identification numbers or wire numbers listed in the identifies each component on the harness. Each End #1 and End #2 columns indicate where the wire harness branch (14) is terminated by an end view of terminates within the harness. the connector (7).
The connector end view show pin (9) and wire number (8) information which corresponds to the component or connector wire table. The wire table displays the component or connector pin number (10), the wire number (11), the wire color (12), and the location where the wire terminates (13). Continued on next page LD30992,00002D8 –19–14JAN06–5/9 9015 05 5