TM2361 (24JUN08) 9015-05-7 450DLC Excavator Operation and Tests 062608 PN=349 System Information 1—Component Identification 4—Wire Harness 7—Wire End #1 Termination 9—Wire Color Number 5—Wire Number Location 10—Wire End #2 Termination 2—Connector 6—Wire Splice 8—Wire Number Location 3—Connector End View Wiring Diagram one end of a wire. In the center, the wire number (8) and wire color (9) are listed. A component identification Each harness on the machine is drawn showing number in the “END #2” column (10) identifies the connectors, wires, and splices. A “W” component opposite end of the wire. identification number identifies harnesses.
(W6, Etc.) The harness is drawn showing spatial arrangement of Component Location Diagram components and branches. The Component Location Diagram is a pictorial view A component identification or connector number (1) by harness showing location of all electrical identifies each component. The harness branch (4) is components, connectors, harness main ground terminated by a top or side view of the connector (2). If locations and harness band and clamp location. Each more than one wire is supplied to the connector, a component will be identified by the same identification harness side connector end view (3) is provided.
Each letter/number and description used in the System wire number is labeled for the appropriate pin. If only Functional Schematic Diagram. one wire is supplied to the connector, the wire number (5) is indicated. Connector End View Diagram An “X” component identification number of 100 or The Connector End View Diagram is a pictorial end higher identifies splices (6). Each splice lists side A view of the component connectors showing the wires and side B wires to differentiate the side of the number of pins in the connector and the wire color and harness that the wires come from. identifier of the wire in every connector.
Each component will be identified by the same identification A wire legend is provided for each harness. A letter/number and description used in the System component identification number is listed in the “END Functional Schematic Diagram. #1” column (7) to indicate the termination location of Continued on next page LD30992,00002D8 –19–14JAN06–7/9 9015 05 7